Water-based coating technologies are attracting attention as manufacturers seek lower-emission alternatives to solvent-based systems. However, the available information on HPU-7710 does not confirm that waterborne epoxy resin is replacing solvent-based epoxy. Instead, it presents HPU-7710 as a solvent-free, water-based hydroxy polyurethane dispersion developed for flexible two-component coatings.
HPU-7710 is an aliphatic, hydroxy-functional polycarbonate ester-polyurethane dispersion intended for water-reducible two-component polyurethane formulations. Its documented properties focus on applications where elasticity, surface feel, plastic adhesion, and appearance are important.
The product is therefore positioned as a polyurethane binder for flexible water-based coatings, rather than as a direct substitute for every solvent-based epoxy formulation.
The supplied technical information identifies HPU-7710 as a polyurethane dispersion, not a waterborne epoxy resin. Its hydroxy-functional chemistry is designed to support two-component polyurethane coatings, so the available data can be used to evaluate water-based polyurethane performance but cannot establish a direct comparison with solvent-based epoxy resin.
Epoxy and polyurethane systems may serve different formulation objectives, including chemical resistance, hardness, flexibility, adhesion, curing behavior, and substrate compatibility. A replacement decision would therefore require side-by-side testing under the intended application conditions. The current documentation supports a narrower conclusion: HPU-7710 may be relevant where a flexible, water-based polyurethane coating with soft-touch properties and plastic adhesion is required.
HPU-7710 is described for water-based two-component coatings that combine flexibility with a refined surface appearance. Its high elasticity can help coating films accommodate movement in flexible materials, while soft-touch performance adds a tactile finish. Scratch resistance, gloss, and low haze further support applications where both durability and visual quality matter.
The company associates the product with several application areas, including 3C digital products, automotive interiors, household appliances, plastic toys, textiles, printing leather, inks, and adhesives. These examples indicate that the product is intended for a broad range of flexible or plastic-related coating requirements, although final suitability depends on formulation design and substrate testing.
| Evaluation category | Information documented for HPU-7710 | Status of waterborne epoxy comparison |
|---|---|---|
| Resin chemistry | Aliphatic hydroxy-functional polycarbonate ester-polyurethane dispersion | No comparative epoxy data supplied |
| Solvent content | Solvent-free and suitable for water-reducible systems | No corresponding data supplied |
| Intended coating system | Two-component water-based polyurethane coatings | Direct replacement has not been established |
| Flexibility and tactile feel | High elasticity and soft-touch characteristics | No equivalent performance data supplied |
| Plastic substrate performance | Good adhesion and recoatability on plastic | No comparative results supplied |
| Appearance | High gloss and low haze | No comparative results supplied |
No. HPU-7710 is identified as a water-based hydroxy polyurethane dispersion. More specifically, it is an aliphatic, hydroxy-functional polycarbonate ester-polyurethane dispersion for water-reducible two-component polyurethane coatings.
The available documentation does not support a universal replacement claim. HPU-7710 is intended for selected water-based polyurethane applications that require flexibility, soft-touch performance, scratch resistance, plastic adhesion, high gloss, and low haze.
Listed application scenarios include 3C electronic products, automotive interiors, home appliances, plastic toys, textiles, printing leather, inks, and adhesives. A laboratory evaluation should confirm compatibility with the specific substrate, crosslinker, pigment package, and processing conditions.
The available evidence does not show that waterborne epoxy resin has become a proven practical replacement for solvent-based epoxy. It describes a different technology: HPU-7710, a water-based polyurethane dispersion developed for flexible two-component coatings.
Potential users should assess the material against the actual performance targets of their application, including plastic adhesion, flexibility, soft-touch feel, scratch resistance, gloss, haze, weather resistance, and recoatability. The documented supply model includes research and development, manufacturing, direct sales, factory quality control, technical support, reference formulas, a minimum order quantity of 900 kg, and an estimated delivery period of 7-10 days. For technical consultation or product support, contact Sophia Chao at sophia@guanzhihg.com.
Guangzhou Guanzhi New Material Technology Co., Ltd. was founded in 2014 and integrates research and development, production, sales, and technical services for water-based materials. Its product portfolio includes water-based resins, water-based crosslinkers, water-based additives, and bio-based special polyols.
The company reports research and application centers in Guangzhou and Shanghai, more than 50 invention patents, and a technical team that includes over 10 doctors. Its listed credentials include the Quality Management System Certificate and the Certificate of Intellectual Property Compliance Management System Certification. The company also identifies cooperation cases involving PPG and Nippon Paint.

REPORT