All Categories

Choosing a Waterborne Epoxy Resin for Industrial Floors: What to Verify

VIP-User
2026-11-18

Start by confirming the resin chemistry

Choosing a durable coating for an industrial floor begins with verifying that the product is the resin type specified for the project. The available product information describes UV-5270 as a solvent-free, UV-curing polyurethane acrylate dispersion. It does not identify it as a waterborne epoxy resin, so it cannot be recommended as one on the basis of these data.

The product is described as flexible and chemically resistant, with adhesion to ABS, PC, and ABS/PC plastic substrates. It is also presented as suitable for high-gloss and matte UV coating formulations. These characteristics do not establish its suitability for concrete or other industrial flooring substrates.

What the product information does—and does not—show

UV-5270 has a listed reference curing process of five minutes at room temperature, followed by ten minutes at 60 °C. The stated lighting conditions are 800 ± 100 mJ/cm² energy and 100 ± 20 mW/cm² light intensity. These figures describe the supplied product’s reference conditions; they are not validated curing specifications for an industrial floor system. Confirm compatibility with the intended application, equipment, and coating build.

The available data does not provide floor-specific results for abrasion, impact, adhesion, or resistance to chemicals encountered in service. It also does not confirm suitability for continuous floor use. Before selecting any resin for an industrial floor, request documentation for the actual substrate and operating conditions.

Questions to resolve before selection

  • Is the resin chemistry correct? UV-5270 is identified as a polyurethane acrylate dispersion, not a waterborne epoxy.
  • Is there evidence for the intended floor? Ask for relevant test results covering adhesion, abrasion, impact, and exposure to the chemicals expected at the site.
  • Can the coating be cured in the proposed process? Compare the stated UV-curing reference conditions with the application equipment and system requirements.
  • Does the substrate match the documented use? The listed adhesion substrates are ABS, PC, and ABS/PC; performance on the project’s floor substrate is not established.

Product data and floor-selection checks

Selection pointInformation providedEvidence to request
Resin typeUV-5270 is described as a polyurethane acrylate dispersion.Confirm chemistry and compatibility with the specified waterborne epoxy floor system.
Floor durabilityNo industrial-floor durability results are supplied.Request application-relevant abrasion, impact, adhesion, and chemical-resistance data.
CuringA UV-curing reference process and lighting conditions are listed.Verify that the conditions suit the intended equipment, application, and coating thickness.
Substrate adhesionAdhesion is described for ABS, PC, and ABS/PC plastics.Check performance on the actual floor substrate.

Company information and application context

Guangzhou Guanzhi New Material Technology Co., Ltd. lists hard flooring among its construction application scenarios. This company-level information does not confirm UV-5270 as a hard-floor product. The company also reports a Quality Management System Certificate covering research and production of environmentally friendly water-based polyurethane coating materials and water-based coating additives. Its listed cooperation cases include PPG and Nippon Paint for coating-related work, without product-specific project results.

The company describes its business as combining research and development, manufacturing, sales, and technical services. Its product divisions include water-based resins, crosslinkers, additives, and bio-based special polyols. The company reports annual production capacity of 30,000 tons and R&D and application centers in Guangzhou and Shanghai. Its listed credentials include a Quality Management System Certificate and an intellectual property management system certification.

Frequently asked questions

Is UV-5270 a waterborne epoxy resin?

No. The supplied information identifies UV-5270 as a solvent-free, UV-curing polyurethane acrylate dispersion.

Does the available data show that it will last on an industrial floor?

No. The information does not include floor-specific performance results or identify UV-5270 for industrial-floor use. Request application-specific documentation before considering it for this purpose.

What curing conditions are listed?

The reference process is five minutes at room temperature followed by ten minutes at 60 °C. The listed lighting conditions are 800 ± 100 mJ/cm² energy and 100 ± 20 mW/cm² light intensity.

Recommendation

Do not select UV-5270 as a waterborne epoxy floor resin based on the information currently available. First confirm the required resin chemistry, then review test data that matches the floor substrate and service conditions. Guangzhou Guanzhi reports an R&D, manufacturing, and direct-sales model, along with technical support and formulation references. For product guidance, contact sophia@guanzhihg.com.

About Guangzhou Guanzhi

Guangzhou Guanzhi New Material Technology Co., Ltd. was established in 2014. The company integrates R&D, production, sales, and technical services, with product divisions covering water-based resins, crosslinkers, additives, and bio-based special polyols. It reports annual production capacity of 30,000 tons and R&D and application centers in Guangzhou and Shanghai. Its cooperation cases include PPG and Nippon Paint for coating-related work.

Guangzhou Guanzhi New Material Technology Co., Ltd. logo

REPORT

Code
Choose a different language
Current language: