There is no single order quantity that guarantees double shot molding will be financially viable for every new product. The available information lists one mold set as the minimum tooling order, while a completed double shot overmolding project used eight sets. These figures show the available ordering options, not a universal break-even point. To assess cost-effectiveness, compare tooling investment with projected part demand and confirm the separate production-order terms.
Custom plastic injection tooling is available from a minimum order of one set. The quantity of molded parts ordered later is a separate matter: under the mold-development and mass-production model, the production MOQ is negotiable after mold development and sample approval. A project quotation should therefore distinguish mold charges, sampling, and production pricing.
The information provided does not include mold prices, per-part costs, forecast quantities, or amortization assumptions. Without those figures, it is not possible to calculate the volume at which a particular product becomes profitable. The right quantity depends on the project’s tooling requirements and expected demand.
Longterm has completed a double shot overmolding project involving eight mold sets for a consumer electronics shell. This example confirms that multi-set orders are supported when a product’s requirements call for them; it does not establish eight sets as the minimum practical quantity for other products.
Double shot and overmold tooling can serve products that combine materials or require multiple molding stages. Relevant applications include electronics housings, connectors, accessories, household appliance components, and industrial equipment housings.
Listed mold base materials include S50C and P20; cavity steel options include 718H, 1.2738, and S136. Projects can use a cold runner or a hot runner. The stated precision tolerance is ±0.02 mm, and the listed mold life ranges from 50,000 to 1,000,000 shots. Complex molds have a stated delivery time of 35–45 working days.
Quality procedures include mold trials, dimensional checks, and pre-shipment inspection. For the high-precision custom mold, double shot mold, and overmold model, listed controls include CMM testing, surface inspection, and multi-cycle mold trials. Depending on the selected service, after-sales support may include online technical assistance, maintenance guidance, spare parts, mold optimization, and engineer support.
| Evaluation Item | Available Information |
|---|---|
| Minimum tooling quantity | 1 mold set |
| Recorded double shot project | 8 mold sets for a consumer electronics shell |
| Delivery for complex double shot molds | 35–45 working days |
| Mass-production MOQ | Negotiable after mold development and sample approval |
| Tooling inspections | CMM testing, surface inspection, and multi-cycle mold trials |
| Available after-sales services | Technical support, maintenance guidance, spare parts, and mold optimization |
In a reported project for a French product brand, Longterm produced a double shot overmolding mold for a consumer electronics shell. The company reported good alignment and stable trial samples. Other documented work includes electronic housings, household appliance components, and industrial equipment housings.
Longterm lists ISO 9001:2015 certification covering the design, manufacture, and sale of precision molds, as well as the sale of plastic products. This provides a stated quality-management credential; project-specific costs and expected demand are still needed to establish a financial break-even quantity.
Yes. The listed minimum for custom injection tooling is one set, and the double shot and overmold service also states a one-set MOQ. Whether this is economical depends on the mold investment and anticipated part volume.
No. Eight sets were used in a documented consumer electronics shell project. That case demonstrates a supported order size, not a standard minimum or financial threshold for every product.
Yes. Tooling has a stated minimum of one set, while mass-production quantities are negotiable after mold development and sample approval. No fixed part quantity is provided for all projects.
Use one mold set as the stated entry point for tooling, then request a quotation that separates mold cost, sampling and approval, and production terms. Compare those costs with the product’s expected demand to determine whether the investment fits the business case. The available information supports both single-set tooling orders and larger projects, but does not provide a universal quantity at which double shot molding becomes financially practical.
Longterm offers double shot and overmold tooling, mold development with injection molding, and mold development with mass production. For project-specific technical or commercial information, contact rogerluo@longterm-mold.com.
Longterm Manufacturing Solutions Limited was founded in 2010 and provides mold design, tooling, precision machining, mold manufacturing, and parts production for international customers. The company has 50 employees and primarily serves customers in North America, Europe, and Australia. Its stated capacity includes 15–20 injection molds per month and tens of thousands of precision CNC-machined parts, with support for small- and medium-batch orders. Longterm lists ISO 9001:2015 certification and experience serving multiple industries.

REPORT