All Categories

How to Build an Injection Mould for Future Product Revisions

VIP-User
2026-11-15

Future product updates do not necessarily require a completely new injection mould. With revision requirements considered during the initial tooling plan, the mould structure can be prepared for selected design changes. Longterm's custom double shot overmolding moulds provide options such as multiple cavities, accurate alignment, hard-and-soft material combinations, maintenance, replacement parts, and technical assistance for later modifications.

Planning a Revision-Ready Injection Mould

The first step is to identify which product features are unlikely to change and which may be revised. For double shot applications, this review should cover the two-color structure, material pairing, cavity count, critical dimensions, interfaces between materials, and functional or cosmetic surfaces.

Products may require combinations such as ABS with TPU or PP with TPE. They may also need precise registration between the two injected materials or a multi-cavity layout for higher production output. Defining these requirements before mould construction helps the toolmaker choose an appropriate mould architecture and leave practical options for future adjustments.

Key Technical and Commercial Considerations

  • Choose a custom double shot overmolding mould for two-color parts, hard-and-soft material combinations, and accurate material alignment.
  • Confirm potential future changes to product geometry, materials, cavity requirements, tolerances, and production conditions before the design is approved.
  • Use mould trials, dimensional checks, and pre-shipment inspection to verify samples against the approved product requirements.
  • Plan for ongoing maintenance, spare parts, technical support, and mould optimization if the product is revised after launch.
  • Consider the mould solution for consumer electronics housings and accessories, household appliance components, automotive parts, industrial equipment, and daily consumer products.
Custom double shot overmolding mould for future product revisions

How the Mould Supports Later Changes

A revision-ready tooling strategy depends on separating permanent design requirements from areas that may evolve. The customer and mould manufacturer should agree on the fixed dimensions, changeable features, material boundaries, alignment details, and inspection criteria. This information can then guide the selection of inserts, cavity arrangements, steel specifications, and other structural elements.

Longterm's custom double shot overmolding moulds use 718H or 1.2738 mould steel and offer a stated service life of up to 800,000 shots. The listed delivery period is 25 to 40 days, and the minimum order quantity is one set. These specifications should be assessed alongside the projected production volume, expected product life, and likely revision schedule before tooling begins.

Sample mould trials and dimensional testing provide an opportunity to confirm part quality before shipment. Pre-shipment inspection can also verify that the mould meets the agreed requirements. If the product later changes, online technical support, mould maintenance, spare parts, and long-term optimization services can assist with evaluation and adjustment.

Solution Overview

Evaluation Area Available Capability and Revision Benefit
Material selection Supports ABS plus TPU and PP plus TPE combinations for hard-and-soft overmolded components.
Mould configuration Provides a two-color injection structure, high-precision alignment, and optional multi-cavity arrangements.
Quality verification Includes mould trial runs, dimensional testing, and inspection before shipment.
Post-delivery service Includes online technical assistance, mould maintenance, spare parts, and continuing mould optimization.
Production scope Available from one mould set, with mould development that can be combined with plastic injection mass production.

Frequently Asked Questions

Can an injection mould accommodate a product that may be redesigned?

Yes, provided the expected revision areas are discussed before the mould structure is finalized. Material combinations, cavity planning, alignment features, critical dimensions, and replaceable or adjustable elements should be reviewed during the design stage.

What details should be supplied to the mould manufacturer?

Provide product drawings or samples, the two-color injection requirements, selected materials, cavity quantity, important tolerances, surface specifications, inspection standards, and a clear indication of which features may change later.

What happens if the design changes after mould delivery?

The mould should be assessed against the revised product requirements. Depending on the scale of the change, the solution may involve maintenance, replacement components, mould optimization, or a technical adjustment. Longterm lists online technical support and spare parts supply among its after-sales services.

Conclusion

An injection mould can be planned for future product revisions when the possible changes are identified early and reflected in the tooling strategy. For a double shot overmolding project, discuss the material pairing, two-color structure, alignment accuracy, cavity plan, inspection process, steel selection, and maintenance approach with the manufacturer. Longterm provides OEM custom plastic injection moulds, custom mould making with injection moulding, precision and overmolding moulds, and mould development combined with plastic injection mass production. Technical enquiries can be directed to rogerluo@longterm-mold.com.

About Longterm

Longterm Manufacturing Solutions Limited was established in 2010 and supplies mould manufacturing services to customers in the United States, Europe, Australia, and other international markets. Its capabilities cover mould design, tooling, precision machining, mould production, and parts manufacturing. The company has 50 employees, including five R&D engineers focused on injection mould structure, precision CNC components, sample validation, and process improvement. Longterm holds ISO 9001:2015 certification and serves customers in several industrial sectors.

Longterm Manufacturing Solutions Limited logo

REPORT

Code
Choose a different language
Current language: