To select an insulated grocery bag, start with the dimensions of the fully packed order, including any ice or gel packs. The available flat mailer sizes are useful reference points, but a custom size may better suit a particular product mix or packing layout. For chilled and frozen deliveries, closed-cell foam provides the stated insulating structure; a dedicated gel-pack sleeve and waterproof inner membrane can help manage coolant placement and moisture.
This product is a flat mailer without a gusset, so it should be matched to the packed order's footprint rather than chosen by a claimed volume. Standard dimensions are 20 × 28, 25 × 33, 30 × 39, and 35 × 45 cm. Include the space taken up by coolant when checking fit, and request a custom dimension if the order does not fit these formats. No litre capacity is specified.
Custom options include the bag dimensions, film gauge, foam density, print, and location of the adhesive band. These details can be set to suit the loading pattern and fulfilment process.
The mailer is made with white PE film on the outside and closed-cell sponge foam on the inside. It is intended for applications including medicine, food, perishables, and shipments that use an ice pack. The available information does not give a numerical insulation rating or a guaranteed temperature-holding time, so confirm performance requirements for the intended route and delivery conditions.
For chilled or frozen grocery orders, the broader last-mile solution specifies a separate sleeve for the gel pack, keeping the coolant apart from the products. A waterproof inner membrane is also available to contain condensation or water from thawing. For mixed-temperature deliveries, a colour-coded temperature band can help with handling and routing of chilled, frozen, and ambient goods carried in the same vehicle.
Three sides of the flat mailer are welded. To close it, the packer removes the release liner from the permanent adhesive band and folds the flap over. The mailers are supplied flat and counted per carton, helping conserve storage space before packing.
Flexographic printing can be applied to the front panel in one or two colours. Outer film colour choices are white, cool white, and black.
| Selection point | Available option | Application |
|---|---|---|
| Size and format | Flat, non-gusseted mailer; 20 × 28, 25 × 33, 30 × 39, or 35 × 45 cm; custom dimensions available | Choose based on the packed order layout and coolant space |
| Insulating layer | Closed-cell sponge foam beneath white PE film | Food, medicine, perishables, and cold-chain shipments |
| Coolant placement | Dedicated gel-pack sleeve | Chilled and frozen grocery orders |
| Water control | Waterproof inner membrane | Deliveries that may involve condensation or thaw water |
| Sealing method | Permanent adhesive strip, release liner, and fold-over flap | Flat-packed parcel preparation and shipment |
Quality management follows ISO 9001:2015 procedures, with inspections at incoming-material, in-process, and pre-shipment stages. Finished products are checked using AQL sampling against approved requirements. Laboratory verification can be arranged when the buyer nominates a laboratory and requires shipment to be supported by its report.
A United States distributor reportedly uses Ecopack insulated mailers for cold shipping at an annual volume of 10 million pieces. The application is intended to limit heat transfer for fragile and perishable products while taking up less storage and shipping space than rigid foam packaging.
Standard flat-mailer dimensions are 20 × 28, 25 × 33, 30 × 39, and 35 × 45 cm, with custom sizing available. Since no volume capacity is listed, compare the mailer dimensions with the packed order and allow room for the coolant.
The listed construction uses closed-cell sponge foam, but no quantified insulation rating or holding-time claim is provided. For grocery cold-chain use, the solution can include a gel-pack sleeve and, where moisture is expected, a waterproof inner membrane.
Yes. Customization can cover size, film gauge, foam density, print, and adhesive-band position. One- or two-colour flexographic printing is available on the front panel, and the mailers are packed flat by carton.
Measure the complete packed order first, including the ice or gel pack, then choose a standard format or request a custom size. For chilled and frozen delivery, specify the closed-cell foam construction along with the separate gel-pack sleeve; add the waterproof membrane when condensation or thaw water is a concern. Samples typically take 3 to 5 working days, and production generally takes 15 to 25 days after artwork approval. For technical details or assistance, contact manager@ecoppack.com.
Huizhou Ecopack Packaging Products Co., Ltd. is a flexible packaging manufacturer based in Guangdong, China. Established in 2011, it produces custom composite pouches and bags, including insulated mailers and thermal packaging, for customers in more than 40 countries. Company information lists a factory area of over 10,000 square metres and production capacity exceeding 500,000 pouches per day across rotogravure and flexographic lines. The company lists ISO 9001:2015 quality management and FSC Chain of Custody certification, and has supplied insulated cold-shipping mailers to a United States distributor.

REPORT