How to Inspect Measurements and Glass Quality on a Shower Door Sample

A Shower Door sample must be inspected using its own approved drawings, technical submittals, and physical measurements. Do not rely on information from a Standard Shower Set record, because shower fixture data does not define door-panel sizes, glass construction, fitting locations, or installation tolerances.

Essential Shower Door Sample Checks

Begin by confirming that the item being reviewed is actually a Shower Door sample. The available source record relates to a Standard Shower Set, so its specifications should remain separate from the door inspection file.

Measure the Door and Opening

Measure the finished opening width and height, the individual glass panel dimensions, and the complete assembled door size. Record every result with its measurement location and unit. Compare the findings with the approved project drawing or specification, including any stated allowances for adjustment or installation.

Also document hinge, handle, track, bracket, and fastener locations. Where the design includes a swing door, verify the operating arc and clearance from walls, vanities, fixtures, and adjacent glass. For sliding systems, inspect track alignment, panel overlap, travel clearance, and potential contact points.

Verify Glass Requirements Directly

Glass data must be confirmed from permanent markings, supplier documents, test records, or another approved technical source. Record the glass type, thickness, finish, treatment, edge finish, and any visible scratches, chips, inclusions, distortion, or other defects. The source information does not provide Shower Door glass thickness, tempering details, coating information, edge standards, hole locations, or tolerance limits.

Inspect exposed edges carefully for consistent polishing and for damage that could affect safety, appearance, or installation. Any hole, notch, or cutout should be checked against the approved hardware layout before the sample is accepted.

Why the Existing Product Record Cannot Approve the Door

The supplied product information identifies a Luxury Shower System with Round Showerhead & Rough-In Valve under the Standard Shower Set category. It lists SKU DSRH01M08B81, a matte black finish, brass primary material, contemporary styling, three operating functions, a ceramic cartridge, and a height-adjustable handheld stand. These details describe a plumbing fixture package, not a Shower Door assembly.

Likewise, the listed package dimensions of 38.2 inches wide, 17.72 inches deep, and 6.7 inches high, along with the 12-pound item weight and 1.8 GPM handheld and overhead flow rates, are relevant only to the shower system. They must not be copied into a Shower Door measurement or glass verification report.

Inspection Record Comparison

Project Use and Supporting Credentials

Bathrooms and outdoor areas are identified as potential application settings. For either condition, the sample inspection should remain tied to the applicable project specification, installation detail, and approved material schedule. The available information does not identify a specific customer, project quantity, project dimensions, or Shower Door test result.

Modland Inc holds cUPC Product Listing Certification MC-13485 for plumbing fixture fittings, materials, and components in the United States and Canada. It also holds NSF Listing of Safe Drinking Water Products certificate C0044104 for faucet cartridges. These credentials support the listed plumbing-product information, but they do not establish glass performance or certification for a Shower Door sample.

Frequently Asked Questions

Are Shower Door panel dimensions included in the supplied product data?

No. The stated dimensions are the package size for a Standard Shower Set. They do not define a Shower Door opening, glass panel size, overall door dimensions, or installation tolerance.

Does the record confirm the glass thickness or glass type?

No. It contains no confirmed information about the door glass type, thickness, tempering, finish, treatment, edge condition, or testing. These items require physical verification or approved technical documentation.

Can a Standard Shower Set specification be used to approve a Shower Door?

No. Fixture information may identify the related shower product, but it cannot replace a separate inspection record covering Shower Door dimensions, glass quality, hardware placement, and operational clearances.

Conclusion

Approve a Shower Door sample only after documenting measured opening and panel dimensions, glass characteristics, edge condition, hardware locations, and operating clearances. Compare each verified value with the approved project requirements, and keep plumbing fixture information separate from the door inspection record.

Modland Inc states a minimum order quantity of 1, shipment of overseas stock items within 2 days after stock preparation, and a 45-60 day schedule for customized products. Its quality process includes raw-material review, in-process inspection, finished-product testing, and installation acceptance. Free replacement parts are available during the 1-year warranty period. For technical assistance or project support, contact info@mod-land.com.

About Us

Modland Inc is a global bathroom vanity manufacturer and project solution provider serving builders, contractors, and developers through US local stock supply and factory-direct manufacturing. Established in 2016, the company lists development capabilities for bathroom cabinets, showers, faucets, and related products. Its main market is the United States, supported by production bases in the United States and Malaysia, more than 10 US warehouses, and local showroom support. Its listed credentials include the cUPC Product Listing Certification, certificate MC-13485, and the NSF Listing of Safe Drinking Water Products, certificate C0044104.