All Categories

How to Prepare Production-Ready Artwork for an Insulated Lunch Bag

VIP-User
2026-11-18

Preparing artwork for an insulated lunch bag involves more than setting up the printed panels. The production file should confirm the square-bottom design, finished dimensions, gusset and base depth, print coverage, Pantone colours, aluminium foil laminate, EPE insulation thickness, food-contact PE layer, closure, and handle construction. Ecopack first reviews the 3D structural drawing and a physical sample before printing plates are produced. Once the specification is confirmed, samples are generally available within 3 to 5 working days.

Artwork Preparation Checklist

  • Confirm the square-bottom format, two side gussets, folded bottom panel, and selected base depth of 10, 12, or 15 cm.
  • Set up separate artwork for the front, back, and side gussets, using approved Pantone colours or the natural silver appearance of unprinted foil.
  • Record the aluminium foil exterior, closed-cell EPE foam layer between 2 and 5 mm, and food-grade PE sealing layer.
  • Identify the required seal, zip or tear-notch option, and moulded handle arrangement in the structural specification.
  • Approve both the 3D construction drawing and a physical bag before the printing plate stage.

Structure, Materials, and Print Layout

The production file should represent the product as a square-bottom bag with gussets on both sides and a folded base panel. The base may be specified at 10, 12, or 15 cm, either matching the gusset width or following a separate dimensional requirement. Standard size options extend from 30 x 35 x 10 cm to 45 x 50 x 15 cm.

Because the gussets are visible surfaces, the print layout needs to include the front panel, rear panel, and both side panels. The exterior aluminium foil laminate supports full-colour graphics and can be matched to custom Pantone references. Customers may also choose to leave the foil unprinted for a silver finish.

Square bottom insulated lunch bag with aluminium foil laminate and custom print

The file must also show how the bag will be closed. Options include a flat seal, slider zip, or tear notch, depending on the intended use. If a moulded handle is required, its position and integration into the upper band should be included in the approved construction drawing.

Thermal performance is defined by the material stack rather than the artwork alone. The standard construction uses a closed-cell EPE foam core available from 2 to 5 mm, while an air-bubble layer can be requested for selected applications. A food-grade PE sealant layer forms the inner contact surface and should remain unchanged between sample approval and production release.

Approval Process Before Printing

Huizhou Ecopack Packaging Products Co., Ltd. combines structural development, tooling, printing, lamination, bag making, and inspection within its own production operation. Its team prepares a 3D structural drawing so the customer can verify dimensions, folds, gussets, handle placement, and print positions before any plates are cut.

A physical bag is then used to confirm the real shape and artwork placement. This step is important because a screen file cannot fully show how graphics move across folds, seams, gussets, and the base. Sampling typically takes 3 to 5 working days after the specification has been finalized. Following artwork and sample approval, normal production is scheduled in approximately 15 to 25 days.

This square-bottom insulated format is suitable for restaurant takeaway and hot-food delivery because the stable base helps keep containers upright. It can also be used for e-commerce fulfilment involving temperature-sensitive products when the selected insulation and closure system meet the shipping conditions.

Quality and Manufacturing Information

Ecopack operates under an ISO 9001:2015 Quality Management System, certificate 24CN34510888Q, covering the production of packaging materials such as plastic and paper bags. The company also holds FSC Chain of Custody certification, certificate RINA-COC-004326 (FSC A000532), for qualified FSC Mix and FSC Recycled paper packaging products.

One United States distributor reportedly uses Ecopack insulated mailers for cold shipping at an annual volume of 10 million pieces. The application is intended to limit heat transfer while reducing the storage, transport space, and waste associated with rigid foam packaging.

Insulated lunch bag structure showing printed panels and square bottom

Production Options at a Glance

Specification area Available production options
Construction Square base with two side gussets and folded bottom panel; base depths of 10, 12, or 15 cm
Insulation Closed-cell EPE foam in 2 to 5 mm thicknesses; air bubble available on request
Exterior and colour Printable aluminium foil laminate; custom Pantone matching or unprinted silver foil
Artwork coverage Front, back, and both side gussets
Closure and handle Flat seal, slider zip, or tear notch; moulded handle sealed into the top band
Sampling and production Samples in 3 to 5 working days; production in 15 to 25 days after artwork approval

Frequently Asked Questions

What details belong in the artwork specification?

Include the finished bag dimensions, base depth, gusset arrangement, insulation material and thickness, print coverage, Pantone references, closure type, handle requirement, and any special structural dimensions. The file should also distinguish printed surfaces from areas that remain silver.

What must be approved before production begins?

The customer should approve the structural dimensions and 3D drawing first, then review and accept the physical sample. The final artwork, material stack, closure, and print positioning must all agree with the approved sample before printing plates are manufactured.

How is the finished bag inspected?

Materials are checked on arrival, production is monitored during processing, and finished goods receive pre-shipment inspection under the ISO 9001:2015 system. AQL sampling may cover appearance, dimensions, registration, seal strength, and lamination bond quality.

Recommended File Release Procedure

Release the artwork only after confirming the square-bottom dimensions, gusset and base measurements, panel coverage, colours, aluminium foil laminate, EPE foam, PE sealant, closure, and handle. Approve the 3D drawing and physical sample before plate production, then plan for 3 to 5 working days for sampling and 15 to 25 days for production after final artwork approval. Custom orders commonly begin at approximately 5,000 to 10,000 pieces, depending on the size and construction. For technical guidance, contact manager@ecoppack.com.

About Ecopack

Huizhou Ecopack Packaging Products Co., Ltd. is a flexible packaging manufacturer based in Guangdong, China. Founded in 2011, the company produces customised composite pouches and bags for insulated packaging, coffee, pet food, spout pouch, kraft, compostable, and ESD applications. Its facility covers more than 10,000 sqm and includes in-house structural design, printing, lamination, bag conversion, and quality inspection. Ecopack serves customers across several industries and maintains ISO 9001:2015 and FSC Chain of Custody certifications.

Huizhou Ecopack Packaging Products Co., Ltd. logo

REPORT

Code
Choose a different language
Current language: