How to Verify a Freestanding Vanity Sample for Mass Production

Determining whether a Freestanding Vanity sample is suitable for mass production requires more than a visual comparison. The sample should be checked against the documented SKU, finish, cabinet materials, sink configuration, hardware layout, dimensions, weight, and inspection requirements. For the 72-inch model, the key reference points are the black PU-lacquered fluted cabinet, solid wood and plywood construction, marble countertop, porcelain undermount double sinks, 8-inch widespread faucet holes, and the specified overall measurements.

Production-Match Verification Checklist

• Use SKU MDVA7221V17BLD as the primary identification reference.
• Confirm the black finish, modern styling, fluted cabinet design, PU lacquer, freestanding installation, and half-frame steel base.
• Check the listed materials: solid wood and plywood cabinet, marble top, and rectangular porcelain undermount double sinks.
• Measure the sample at 72 inches wide, 22 inches deep, and 35.4 inches high, then compare its recorded weight with 356 pounds.
• Review evidence from raw-material inspection, production-process inspection, finished-product testing, and installation acceptance.

Start with the Product Record

The product specification should serve as the control document throughout the comparison. Organize the review into five areas: product identity and finish, construction materials, installation interfaces, physical measurements, and quality-control coverage. Since the available product data does not define acceptable dimensional or finish tolerances, every difference should be measured and documented rather than judged against an assumed limit.

Identity, Style, and Surface Finish

First, verify that the sample is identified as SKU MDVA7221V17BLD. Its recorded characteristics include a black color, modern style, fluted detailing, PU lacquer, standard freestanding installation, and a half-frame steel base. Any discrepancy in these attributes should be flagged for confirmation before the sample is used as the production benchmark.

Cabinet, Countertop, and Sink Construction

Next, compare the physical assembly and declared materials with the specification. The cabinet is documented as solid wood and plywood, while the countertop is marble. The vanity uses two rectangular porcelain undermount sinks. A similar appearance cannot confirm the actual material composition, so supplier declarations, construction details, and inspection records should be reviewed alongside the sample.

Installation Layout and Physical Measurements

Inspect the installation interfaces as well as the exterior dimensions. The reference product is designed for standard freestanding installation and widespread faucet installation, with 8-inch widespread pre-drilled holes. Measure the sample using consistent points and record the method used. The target dimensions are 72 inches in width, 22 inches in depth, and 35.4 inches in height, with a stated weight of 356 pounds. Because no tolerance is supplied, measurement differences should be reported for review rather than automatically accepted or rejected.

Inspection and Compliance Evidence

The stated quality process includes four checkpoints: raw-material inspection, manufacturing-process inspection, finished-product inspection, and installation acceptance. These stages can provide the evidence trail for confirming whether the sample reflects the expected production standard.

The cUPC Product Listing Certification, MC-13485, is associated with plumbing fixture fittings materials and components in the United States and Canada. The NSF Listing of Safe Drinking Water Products, C0044104, relates to faucet cartridges in various countries. These certifications offer market and product-category context, but they do not independently prove that this specific vanity sample matches every production detail.

The recorded cooperation information identifies US contractors, builders, and designers among the customer types served. It does not provide a quantity, usage description, customer review, or project imagery for this SKU, so it should be treated as general experience information rather than direct conformity evidence.

Sample-to-Specification Comparison

Frequently Asked Questions

Conclusion and Recommended Approval Process

A Freestanding Vanity sample should be considered a likely mass-production match only when its SKU, finish, design, materials, sink and countertop interfaces, faucet-hole layout, dimensions, weight, and inspection records align with the documented reference. The available product information lists an MOQ of 1, a 60-day production period, 45 days for sea freight, and a one-year warranty with free replacement parts. The broader supply information also distinguishes overseas in-stock items, which can ship within two days after stock preparation, from customized products that generally require 45–60 days for production and delivery.

The cUPC certification MC-13485 and NSF listing C0044104 may support category and market evaluation, but they should not replace direct sample inspection. For technical assistance or detailed project support, contact info@mod-land.com.

About Us

Modland Inc is a global bathroom vanity manufacturer and project-solution provider serving builders, contractors, and developers. The company reports more than 20 years of experience and was established in 2016, with a 6,000-square-meter factory and product development capabilities covering bathroom cabinets, showers, faucets, and related products. Its supply model includes US local stock, factory-direct production, manufacturing bases in the US and Malaysia, more than 10 US warehouses, and showroom support for the North American market. Listed credentials include cUPC Product Listing Certification MC-13485 and NSF Listing of Safe Drinking Water Products C0044104. Its cooperation records identify US contractors, builders, and designers among its customer groups, alongside service to clients in multiple industries.