A successful bulk order for cold chain packaging depends on more than bag size and artwork. Buyers should verify the construction, insulation material, foil laminate, food-contact layer, closure, handle, order quantity, production schedule, inspection standards, and delivery method. For a bottom-gusset insulated grocery bag, the base depth, EPE thickness, coolant-pocket design, and final sample approval must match the requirements of the chilled or frozen products being shipped.
The standard design is an insulated bag with a bottom gusset, no side gusset, and a four-edge seal. Base depth options may include 8, 10, or 12 cm, although other measurements can be developed for a specific order. Typical size options range from 30 x 35 + 8 cm to 50 x 55 + 12 cm.
Do not approve dimensions based only on the external appearance. Compare the finished size and base depth with the cartons, trays, grocery containers, chilled meals, or frozen goods that will be loaded into the bag. The loading method and the amount of clearance needed around the products should also be included in the specification.
The outer surface is made from an aluminium foil laminate and can carry full-colour printing. Insulation is provided by closed-cell EPE foam, generally available in thicknesses from 2 to 5 mm. Air-bubble insulation may also be requested where it suits the application. The inner sealing layer uses food-grade PE sealant.
These materials should be recorded in the approved technical sheet rather than left as informal production notes. The document should identify the selected foam thickness, laminate structure, contact layer, print finish, and any requirements related to food-contact use. This gives the buyer a clear basis for checking incoming materials and finished bags.
The usual opening is heat sealed. A zip track or tear notch can be added when the user needs easier access or resealing. The moulded handle is welded into the top seal, so its location, welding area, and expected carrying load should be agreed before mass production begins.
For grocery delivery and last-mile cold chain distribution, the design can include a separate gel-pack sleeve, a waterproof inner membrane, and a colour-coded temperature band along the bottom edge. For pharmacy shipments maintained at 2-8°C, the bag or mailer can be configured for a phase-change gel pack, with a dedicated sleeve and a flat, unprinted area for monitoring marks or batch labels.
A physical sample should be checked before production, especially for a new structure or custom size. Review the fit, base stability, handle attachment, seal appearance, insulation placement, and printed graphics on the actual bag. Screen-based artwork approval alone may not reveal problems with proportions or usability.
Custom orders commonly begin at approximately 5,000 to 10,000 pieces, depending on the dimensions, materials, and construction. Standard stock sizes may be available from inventory. Sampling generally requires 3 to 5 working days, while regular production takes about 15 to 25 days after the artwork has been approved.
Because artwork approval starts the production timeline, all details should be settled beforehand. The approved file should correspond to the final dimensions, laminate, foam thickness, closure, handle position, print requirements, and any temperature or labelling features.
Quality management is carried out under an ISO 9001:2015 system. Controls cover incoming materials, production-stage checks, and pre-shipment inspection, with AQL sampling applied to finished goods. Buyers can request checks for appearance, dimensions, print registration, seal strength, and lamination bond. Laboratory testing may also be arranged through a laboratory selected by the buyer.
For qualifying paper and packaging materials, the company also maintains FSC Chain of Custody certification covering specified FSC Mix and FSC Recycled materials. These credentials should be reviewed alongside the buyer's own compliance, documentation, and testing requirements.
| Specification Area | Typical Product Details | Buyer Verification |
|---|---|---|
| Construction | Bottom gusset, no side gusset, four-edge seal | Confirm the structure and selected base depth |
| Size and capacity | Approximately 30 x 35 + 8 cm to 50 x 55 + 12 cm | Match the finished dimensions to the products and loading process |
| Insulation | Closed-cell EPE foam, 2-5 mm; air bubble material available on request | Approve the material and thickness in writing |
| Exterior and contact layer | Full-colour aluminium foil laminate and food-grade PE sealant | Confirm the print, laminate, and intended contact requirements |
| Opening and handle | Heat-sealed mouth; optional zip or tear notch; welded moulded handle | Check access, handle position, weld area, and carrying expectations |
| MOQ and schedule | Usually 5,000-10,000 custom pieces; samples in 3-5 working days; production in 15-25 days after artwork approval | Confirm the exact quantity and delivery calendar for the chosen design |
| Inspection | Incoming, in-process, and pre-shipment checks with AQL sampling | Add buyer-specific standards or third-party inspection instructions |
| Freight | Sea FCL, sea LCL, air, express courier, rail to Europe, and land transport | Choose the mode according to volume, destination, urgency, and budget |
Shipping should be selected after the order quantity, destination, and required arrival date are known. Sea freight can be arranged as FCL or LCL for larger or less urgent shipments. Air freight and express courier are suitable for smaller quantities or tighter deadlines, while rail freight to Europe and land transport provide additional regional options.
Sea transit times depend on the destination and do not include customs clearance. Express courier delivery to the United States, Europe, and Australia is typically 3 to 5 business days door to door. Buyers should confirm the full logistics plan, including production completion, freight transit, clearance, and final delivery, before releasing the purchase order.
One United States distributor uses Ecopack insulated mailers for cold shipping at an annual volume of about 10 million pieces. The reported use case focuses on limiting heat transfer for fragile and perishable products while reducing storage and shipping space compared with rigid foam packaging.
The supplier needs the required dimensions, base depth, insulation material and thickness, closure, handle, print, and overall bag structure. Custom production generally starts at 5,000 to 10,000 pieces, but the final MOQ depends on the exact design and materials.
Samples normally require 3 to 5 working days. Standard production takes approximately 15 to 25 days after artwork approval. The production schedule begins only after the artwork and technical specification have been signed off.
FCL or LCL sea freight is generally suitable for high-volume orders. Air freight and express courier can shorten delivery for urgent or smaller shipments, while rail to Europe and land transport may be practical for specific destinations. The best option depends on the order volume, destination, deadline, and total landed cost.
Before placing a bulk order, consolidate the structure, finished dimensions, base depth, aluminium foil laminate, EPE core, food-grade PE sealant, closure, handle, graphics, coolant sleeve, inspection standard, MOQ, and shipping method into one approved specification. A signed physical sample is especially important when the bag will carry chilled, frozen, pharmaceutical, or other temperature-sensitive products.
Huizhou Ecopack Packaging Products Co., Ltd. is a manufacturer and exporter with in-house R&D, printing, lamination, bag making, and inspection capabilities. Its reported production capacity exceeds 500,000 pouches per day, supported by ISO 9001:2015 and FSC Chain of Custody certifications. For technical assistance or a quotation, contact manager@ecoppack.com.
Huizhou Ecopack Packaging Products Co., Ltd. is a flexible packaging producer based in Guangdong, China, and was established in 2011. Its product range includes custom composite pouches and bags, insulated mailers and thermal packaging, coffee bags, pet food packaging, spout pouches, kraft and compostable formats, and ESD bags. The company exports to more than 40 countries.
Its internal R&D service covers structural design and tooling. More than ten bag structures are available, and 3D structural drawings can be issued for approval before printing plates are produced. The company holds ISO 9001:2015 Quality Management System and FSC Chain of Custody certification and serves customers across a range of industries.

REPORT