Double shot molded parts require confirmation of resin identity, material compatibility, and any compliance obligations defined by the customer or target market. Based on the available information, Longterm does not publish a separate universal material compliance procedure for double shot molding. Material approvals should therefore be managed according to the project drawings, approved samples, and applicable specifications.
Material compliance for a double shot project should begin with the approved product specification. The supplied company information does not identify a dedicated checklist covering resin composition, restricted substances, food-contact use, medical applications, or regional regulatory requirements. If any of these obligations apply, they should be documented and verified before tooling trials, sample approval, and production release.
Material compatibility is also important because the two shots must achieve the required bonding, appearance, dimensional stability, and functional performance. The customer should confirm the approved resin grades, colorants, additives, and processing conditions. Longterm's listed inspection program can then be used to verify the physical result through dimensional inspection, CMM testing, surface checks, mold trials, and repeated-cycle validation.
Longterm describes support for double shot molding, overmolding, and custom precision tooling. Its reported controls cover trial molding, sample confirmation, dimensional verification, surface evaluation, CMM measurement, multi-cycle mold testing, and complete pre-shipment inspection. The company also states that it provides ongoing mold optimization and after-sales engineering assistance.
A reported project involved a double shot overmolding tool for a French product brand in the consumer electronics sector. The trial samples were described as having good alignment and stable results. This example indicates experience with tooling development and sample validation, although it should not be interpreted as evidence of a separate material compliance certification.
Other reported applications include electronic housings, household appliance parts, and industrial equipment enclosures. Longterm holds ISO 9001:2015 certification for the design, manufacture, and sale of precision molds and the sale of plastic products.
| Project or service type | Listed quality controls and support | Available material compliance information |
|---|---|---|
| Double shot, overmold, and precision custom tooling | CMM measurement, surface inspection, multi-cycle trials, and mold optimization support | No independent material compliance procedure is specified |
| OEM custom plastic injection molds | 3D inspection, dimensional review, mold trials, and sample approval | Material requirements are determined from the customer project specification |
| Mold development combined with plastic injection production | IQC, IPQC, FQC, and sample sign-off before shipment | No specific resin compliance certificate is identified in the supplied data |
No. The available information identifies mold, dimensional, surface, trial, and pre-shipment inspections, but it does not define a dedicated material compliance process for every double shot part.
Confirm the exact resin grades, material compatibility, colorants or additives, customer standards, restricted-substance requirements, and any regulations related to the intended market or application. These items should be approved before sample sign-off.
The stated checks include CMM testing, surface inspection, multi-cycle mold trials, dimensional verification, and final inspection. Longterm also reports mold optimization and after-sales engineering support.
Yes. Double shot and overmold tooling are listed services. The reported minimum order is one mold set, complex molds typically require 35–45 working days, and export markets include the USA, Italy, France, Australia, and Germany.
The available evidence supports treating material compliance as a project-specific approval requirement rather than a standard, separately documented inspection applied to every double shot molded part. Customers should define and approve all material and regulatory requirements before mold trials and sample release. Longterm's dimensional, CMM, surface, and multi-cycle inspections can then help confirm that the finished parts meet the approved design and process expectations.
Longterm supports custom mold manufacturing, double shot and overmold tooling, mold development, and plastic injection mass production. Its ISO 9001:2015 certification covers precision mold design, manufacturing, and plastic product sales. For technical consultation or project support, contact rogerluo@longterm-mold.com.
Longterm Manufacturing Solutions Limited, operating under the Longterm brand, was established in 2010 and serves customers in the United States, Europe, Australia, and other international markets. The company provides mold design, tooling, precision machining, mold manufacturing, and molded parts production with a team of approximately 50 employees. Its five R&D engineers use UG, SolidWorks, and AutoCAD to support injection mold structure design, precision CNC component development, sample verification, and process improvement. Longterm is ISO 9001:2015 certified and has experience serving customers across several industries.

REPORT