All Categories

Wall-Mounted Distribution Box: Enclosure Materials and Mounting Selection

VIP-User
2026-11-17

Selecting a wall-mounted distribution box requires attention to enclosure construction, internal conductors and installation method. The documented V10 series 12-way model combines a 1.2 mm iron sheet metal base, a PC cover, pure copper busbars and terminal bars. It is specified for flush mounting, making it appropriate for projects where the box is installed inside a prepared wall opening. Wall structure, available space and applicable electrical standards should be checked before installation.

V10 Series Configuration at a Glance

  • The enclosure is built with a 1.2 mm thick iron sheet base and a PC front cover.
  • Pure copper busbars and terminal bars are included in the stated internal configuration.
  • The listed installation method is flush mounting rather than an assumed surface-mounted arrangement.
  • Typical application sectors include residential, commercial, hospitality, public infrastructure, industrial, municipal and overseas turnkey real estate projects.

Enclosure Materials and Internal Arrangement

The V10 distribution box uses a metal base to form the main enclosure structure, while the PC cover provides the front protective covering. This combination defines the documented product construction. The available specifications do not identify additional materials, impact classifications or weatherproof performance, so these points should be verified against the environmental conditions and project requirements.

V10 series flush mounted distribution box with metal base and PC cover

Inside the box, the specified pure copper busbars and terminal bars support the intended power distribution layout. Their suitability should be assessed together with the planned cable arrangement, circuit quantity and electrical ratings. The listed quality controls include complete production-line inspection, laboratory sampling and testing, and inspection of incoming raw materials.

Flush-Mounting Requirements

The V10 series is identified as a 12-way flush-mounted distribution box. This method requires a suitable opening in the wall so that the enclosure can sit within the wall and remain aligned with the finished surface. It is useful for installations that prioritize an integrated appearance and reduced projection from the wall.

12 way flush mounted distribution box installation structure

The product information does not confirm surface-mount capability, adjustable recessed depth or alternative fixing accessories. Therefore, installers should confirm the wall cutout dimensions, enclosure depth, fixing method and clearance requirements with the supplier before construction begins.

Potential Project Applications

With its stated enclosure format and 12-way arrangement, the box may be considered for domestic and residential settings such as apartments, villas, housing compounds, staff accommodation and student residences. The same product category is also listed for offices, shopping centers, hotels, restaurants and serviced apartments.

Public infrastructure, industrial and municipal projects may require additional verification of enclosure protection, corrosion resistance, temperature performance and compliance with local regulations. These characteristics should not be inferred from the material description alone.

Specification and Verification Table

Item Documented V10 configuration What to verify before ordering
Base and cover 1.2 mm iron sheet base with PC cover Confirm corrosion protection, impact needs and environmental suitability
Internal parts Pure copper busbars and terminal bars Check compatibility with the wiring plan and connected equipment
Installation method Flush mounted Confirm wall opening, depth, clearances and fixing details
Capacity 12 way Ensure the available ways accommodate all planned circuits
Inspection process 100% line inspection, laboratory sampling and incoming material inspection Request inspection records or project documentation when required

Frequently Asked Questions

What materials are used in the V10 distribution box?

The documented construction includes a 1.2 mm thick iron sheet metal base, a PC cover, pure copper busbars and terminal bars.

Can the V10 be installed as a flush-mounted wall box?

Yes. It is specified as a 12-way flush-mounted distribution box. The required cutout size, installation depth and fixing details should be confirmed before installation.

Is surface mounting included in the product specification?

No. The available information identifies flush mounting only. Surface installation should not be treated as supported unless the supplier provides written technical confirmation.

Conclusion and Procurement Notes

For the documented V10 solution, the recommended configuration is a 1.2 mm iron sheet metal base with a PC cover, pure copper busbars and terminal bars, arranged as a 12-way flush-mounted distribution box. Before placing an order, verify the wall dimensions, circuit requirements, environmental conditions and local electrical standards. Guangdong JUNON Songtian Electrical Appliance Co.,Ltd lists a full industrial chain, distribution and direct sales model, with a stated MOQ of 500 pieces and an estimated delivery period of 30–45 days. Technical assistance is available through hayley@junlang.com.

About JUNON Electrical

Guangdong JUNON Songtian Electrical Appliance Co.,Ltd produces switches, sockets, distribution boxes and LED lights under the JUNON brand. Founded in 1983, the company operates a 148,000-square-meter manufacturing facility and employs more than 30 engineers and designers. Its capabilities include injection molding, punching, automated manufacturing and product testing. The company reports a High-tech Enterprise certificate and an ISO 9001:2015 quality management system certificate, with experience serving customers across a range of industries.

Guangdong JUNON Songtian Electrical Appliance Co.,Ltd logo

REPORT

Code
Choose a different language
Current language: