All Categories

What Information Should You Record When Testing Garden Tables and Chairs?

VIP-User
2026-11-17

A thorough garden furniture sample report should capture the product’s materials, finish, dimensions, performance, packaging, and order requirements. When evaluating the Baxter aluminum dining table and chairs, record the customized color, UV-resistance option, seating capacity, stackability, structural condition, and any variation between the approved sample and the final production order.

Essential Sample Information to Capture

Begin by identifying the product and documenting its key specifications. The Baxter set uses an aluminum frame with customized color options, standard carton packaging, and a stated load capacity of 150 kg per chair seat. The available UV-resistance specifications are 250 GSM and 300 GSM, so the selected option should be clearly marked in the inspection record.

  • Frame material, surface finish, and approved color reference
  • UV-resistance specification, including 250 GSM or 300 GSM
  • Table and chair dimensions, measured using a stated method
  • Seat capacity, table configuration, and chair stacking performance
  • Packaging condition, sample quantity, lead time, and approval status
Baxter aluminum garden table and chairs for outdoor dining

Dimensions, Capacity, and Functional Checks

Measure each item separately instead of recording only the overall set dimensions. The reference size for the dining table is 180 x 93 x 75 cm, equivalent to 71 x 37 x 30 in. Each chair is listed at 56 x 60 x 83 cm, or 22 x 24 x 33 in. Record the actual sample measurements, the measuring points, and any deviation from the approved specification.

The chairs are designed to be stackable. Test several units together and note whether they align correctly, remain stable, and avoid scratching or damaging one another. The table should also be checked against the required seating arrangement, which may support 6, 10, or 12 people depending on the selected configuration.

During the load and stability assessment, document chair balance, table movement, frame alignment, joint strength, surface defects, coating consistency, and any unusual noise or deformation. The 150 kg per-seat capacity should be assessed according to the approved testing procedure, with the test method and result included in the report.

Appearance, Packaging, and Production Quality

Sample approval should cover both visible quality and manufacturing consistency. Inspect the aluminum frame, welds, joints, edges, coating, color, and overall finish. Check whether the carton packaging protects the furniture adequately and record dents, moisture, incorrect labels, missing components, or other packing issues.

Kingwell’s inspection process covers incoming raw materials, teak grades where applicable, fabric quality, production stages, product dimensions, appearance, structural stability, quantity, and packaging before shipment. For this aluminum dining set, identify the checks completed, list any corrective actions, and confirm that all approved changes are reflected in the formal order.

Aluminum outdoor dining table and stackable garden chairs sample

Order and Project Information

A useful sample record should also connect inspection results with purchasing details. Record the sample quantity, requested color and configuration, sample lead time of 7-10 days, and formal-order lead time of 30-45 days. The listed sample MOQ is 5-10 sets. Any change to the dimensions, finish, materials, or packaging should be approved before mass production begins.

The furniture can be reviewed for restaurant terraces, hotel outdoor areas, resort pool zones, villa projects, and other commercial dining environments. Kingwell has supplied outdoor furniture for a luxury hotel in New Zealand, a resort pool project in the United States, and a five-star beach hotel in Spain. These references may help buyers assess style coordination and suitability for demanding outdoor applications.

Reference Standards and Certification

Kingwell lists BS 5852 for outdoor furniture in the European region and EN 581 for outdoor tables in European countries. When preparing an inspection file, connect each applicable check with the target market and product specification. The record should accurately reflect the relevant requirements without extending the stated certification scope.

Sample Record Comparison

Inspection CategoryInformation to CheckWhat to Record
Materials and finishAluminum frame, customized color, coating, and carton packingApproved material, color reference, visible finish, and packaging condition
Dimensions and loadingTable: 180 x 93 x 75 cm; chair: 56 x 60 x 83 cm; 150 kg per seatMeasured values, test method, deviations, and structural results
Function and layoutStackable chairs and tables for 6, 10, or 12 peopleStacking alignment, stability, configuration, and usability
Order conditionsSample MOQ of 5-10 sets and sample lead time of 7-10 daysQuantity, selected options, approval date, and delivery performance
Production inspectionChecks from raw material receipt through final loadingInspection status, corrections, quantity, and dispatch condition

Frequently Asked Questions

Which details are most important in a garden furniture sample report?

Include the frame material, color, UV-resistance specification, dimensions, seat capacity, stackability, table seating arrangement, structural condition, and packing status.

How should the sample dimensions be verified?

Measure the table against 180 x 93 x 75 cm or 71 x 37 x 30 in, and each chair against 56 x 60 x 83 cm or 22 x 24 x 33 in. Record the measuring method and any tolerance or deviation.

What purchasing information should accompany the test results?

Document the sample quantity, requested color and size, sample lead time of 7-10 days, formal-order lead time of 30-45 days, inspection findings, packaging condition, and changes required before production.

Conclusion

The strongest garden table and chair sample records combine technical measurements with practical performance observations. Confirm the aluminum frame, finish, UV-resistance grade, load capacity, dimensions, stacking behavior, seating configuration, packaging, and order conditions before approving production. This consistent approach supports furniture selection for hotels, resorts, restaurants, terraces, and villa outdoor spaces. For technical assistance or customized project solutions, contact info@kingwellgrou.com.

About Kingwell

Foshan Kingwell Industry co..Ltd. supplies high-end outdoor furniture for engineering projects and serves mid-to-high-end customers with solutions adapted to different environments. Established in 2015, the company operates a 26,800 sqm factory in Foshan, Guangdong, specializing in aluminum and teak furniture. Its design and manufacturing capabilities include CAD drawings, 3D design, customization, automatic cutting machines, robotic welding arms, and combined manual and automated production.

Kingwell lists BS 5852 and EN 581 among its certifications and provides outdoor furniture for clients in multiple industries.

Foshan Kingwell Industry co..Ltd. logo

REPORT

Code
Choose a different language
Current language: