All Categories

Can Double Shot Molding Produce Complex Parts with Multiple Surface Finishes?

VIP-User
2026-11-17

Yes. A double shot molding supplier may be able to produce complex parts with different surface finishes when part geometry, material choices, mold design, alignment, and validation are considered together. Longterm lists custom injection tooling with optional cold or hot runners and a stated tolerance of ±0.02 mm. Its project records also describe stable trial samples and good alignment for an electronics shell.

Planning for Multiple Surface Finishes

Feasibility depends on the part design and the required molding process. Buyers should identify which areas need distinct finishes and define the appearance criteria before tooling is confirmed. Longterm's available information does not specify particular finish types or a supported range of textures or gloss levels, so these details need to be reviewed directly with the supplier.

Longterm offers double shot and overmold tooling, along with custom plastic injection molds. Listed options include S50C and P20 mold bases, 718H, 1.2738, and S136 cavity steels, and cold-runner or hot-runner systems. The stated tooling tolerance is ±0.02 mm, while the reported mold-life range is 50,000 to 1,000,000 shots.

How Tooling and Validation Support the Design

Different surface requirements make design review and trial evaluation important. For complex precision molds, Longterm lists CMM testing, surface inspection, and multi-cycle mold trials. Its general inspection process also includes mold trial testing, dimensional inspection, and a full inspection before shipment. These checks can help assess dimensions, alignment, surface condition, and performance during trials, although the published information does not define finish-specific acceptance standards.

Relevant Project Experience

One reported double shot overmolding project involved eight mold sets for a consumer electronics shell supplied to a customer in France. The customer described the alignment as good and the trial samples as stable. This example provides relevant evidence of experience with multi-material tooling, but it should not be taken as a guarantee for every part shape or combination of finishes.

Longterm also identifies household appliance components, including housings, control panels, and functional plastic parts, among its application areas. The company reports ISO 9001:2015 certification covering the design, manufacturing, and sales of precision molds, as well as sales of plastic products.

Capability Overview

Review pointPublished informationWhat to confirm for mixed finishes
Tooling optionsCold or hot runners, plus listed mold-base and cavity-steel choicesWhether the proposed design supports the specified finish areas
Precision and service lifeStated tolerance of ±0.02 mm; mold life of 50,000 to 1,000,000 shotsSuitability for the part's geometry and production requirements
Quality checksCMM testing, surface inspection, multi-cycle trials, and dimensional checksHow finish appearance and acceptance criteria will be evaluated
Project exampleEight mold sets for an electronics shell; reported good alignment and stable trial samplesApplicability to the specific part and finish combination

Frequently Asked Questions

Can a double shot molded part have two different surface finishes?

Longterm lists custom double shot and overmold tooling, but its published details do not name specific finish combinations. Share the finish locations and visual requirements during the design review to confirm feasibility.

How can quality be checked before production?

Request mold trials and sample approval before moving forward. Longterm lists surface and dimensional inspections and multi-cycle trials for complex precision molds, along with full pre-shipment inspection for its custom tooling product.

What should I send for a feasibility assessment?

Provide part drawings or physical samples and clearly mark the areas requiring different finishes. Longterm says it develops custom solutions from customer drawings or samples; confirm the detailed finish specifications with the team.

Conclusion

A supplier can be considered for complex double shot parts with multiple surface finishes when the tooling approach is assessed against the design and the required appearance is checked through trials and inspection. Longterm offers custom mold making, double shot and overmold tooling, and mold development with injection production. Its electronics-shell project is a relevant example of reported alignment and trial-sample performance. For technical questions or project support, contact rogerluo@longterm-mold.com.

About Longterm

Longterm Manufacturing Solutions Limited was founded in 2010 and serves customers in the United States, Europe, Australia, and other international markets. Its 50-person team includes seven experienced engineers and provides mold design, tooling, precision machining, mold manufacturing, and parts production. The company reports ISO 9001:2015 certification for precision mold design, manufacturing, and sales, as well as sales of plastic products, and has served clients in multiple industries.

Longterm Manufacturing Solutions Limited logo

REPORT

Code
Choose a different language
Current language: