A warranty claim for defective injection mould parts should provide enough traceable information for the supplier to investigate the issue efficiently. The claim should connect the affected component to the relevant mold, production batch, inspection records, approved sample, and requested corrective action. Clear technical evidence helps distinguish a mold-related problem from a production, material, or handling issue.
The purpose of a warranty file is to show how the reported defective injection mould parts relate to the supplied tool and its documented quality process. Begin by identifying the mold and the component it produces. Then state when the problem was discovered and whether it occurred during a trial, sample approval, initial production, or later mass manufacturing.
Include the mold identification number, part description, material, cavity number where relevant, production date, and affected quantity. Mark the defect position on a drawing or photograph whenever possible. This information allows the technical team to locate the relevant mold feature and review the associated production records.
Visible defects should be supported by sharp photographs that show both the overall part and a close view of the affected area. Dimensional concerns should include the feature being measured, the actual result, the required tolerance, and the applicable drawing or approved sample reference. For alignment, fit, flash, sink marks, color, or surface issues, describe the acceptance standard and identify the difference observed.
Where the supplied tool is a custom double shot overmolding mold, the claim may also need to reference the two-color injection arrangement, the hard and soft material combination, such as ABS+TPU or PP+TPE, alignment accuracy, cavity configuration, mold steel, and expected service life. The relevant specification should be identified only when it is connected to the reported failure. Typical documented options include 718H or 1.2738 steel, multi-cavity construction, and a service life of up to 800,000 shots.
A complete submission should follow the available quality-control trail. Attach mold trial reports, mold running results, first article inspection records, full dimension measurements, pre-shipment inspection findings, and the sample confirmation or signed approved sample. Clearly indicate whether the defective part differs from the part accepted before shipment.
If the issue appeared after production began, include the relevant production conditions and the number of parts affected. If it was already visible during trial molding or sample evaluation, state when it was identified and how it was treated at that stage. This timeline helps determine whether the concern is related to tool performance, process setup, material behavior, or subsequent production conditions.
For an alignment or surface-quality claim, combine photographs with the affected feature location and inspection conclusion. For a dimensional claim, provide the measured value and the reference requirement. For a functional claim, explain how the defect affects assembly, operation, appearance, or product performance.
Longterm Mold has experience producing electronic housings, double shot overmolding molds, home appliance components, and industrial plastic parts. Its reported projects include an Italian handheld device component, a French consumer electronics shell, a US home appliance part, and an Australian industrial equipment housing. These projects cover dimensional control, surface finish, accurate alignment, stable trial samples, technical issue resolution, and delivery performance.
The company is certified to ISO 9001:2015 under certificate number 02825Q12549R0S. The certification covers the design, manufacture, and sale of precision molds, as well as the sale of plastic products.

| Record or Attachment | Why It Matters |
|---|---|
| Mold and part identification | Establishes the connection between the reported parts, the supplied tool, the application, and the production batch. |
| Defect explanation and images | Shows the visible condition, position, severity, and affected product features. |
| Dimensional inspection | Offers measurable proof against the engineering drawing, tolerance, specification, or approved sample. |
| Trial and mold-running records | Shows tool behavior during testing and identifies the production stage at which the problem occurred. |
| Pre-shipment inspection and sample approval | Provides the documented baseline used to compare the supplied parts with the accepted condition. |
| Requested corrective action | Clarifies whether the customer needs technical advice, maintenance support, spare parts, repair, or mold modification. |
Provide the mold and part details, defect description, photographs, dimensional measurements, trial records, pre-shipment inspection results, and the approved sample or sample confirmation. Drawings, batch information, and related communications should also be included when available.
Identify the affected feature, record the actual measurement, state the required tolerance or specification, and cite the drawing or approved sample used for comparison. Explain the difference clearly rather than relying only on a photograph.
Depending on the service arrangement and cause of the issue, the requested response may include online technical support, mold maintenance guidance, spare parts, warranty-period repair, or mold modification and optimization assistance.
An effective warranty claim combines traceable mold and part information with objective evidence. Include the production history, defect photographs, dimensional results, trial and inspection records, approved sample comparison, and a specific corrective request. This format gives the supplier a practical basis for reviewing responsibility and proposing an efficient solution.
Longterm Mold provides OEM custom plastic injection molds, custom mold making with injection molding, high-precision double shot and overmolding molds, and mold development with plastic injection mass production. For technical support or a detailed solution, contact rogerluo@longterm-mold.com.
Longterm Manufacturing Solutions Limited, operating as Longterm Mold, was established in 2010. The company provides mold design, tooling, precision machining, mold production, and plastic parts manufacturing. Its team includes 50 employees and 5 R&D engineers responsible for injection mold structural design, precision CNC components, sample validation, and manufacturing process improvement. Engineers use UG, SolidWorks, and AutoCAD, while the company serves customers mainly in North America, Europe, and Australia. Its product range includes injection molds, rapid prototypes, precision parts, and automated production solutions. Longterm Mold holds ISO 9001:2015 certification and supports projects across several industrial sectors.

REPORT