All Categories

How to Lower Injection Mould Costs Without Compromising Part Strength

VIP-User
2026-11-16

Reducing injection mould cost does not require sacrificing the performance or durability of the finished part. The most effective approach is to simplify nonessential geometry, select a cavity layout based on production demand, choose mould steel according to service life, specify only necessary surface finishes, and evaluate hot runners against the complete production plan. Throughout the process, wall thickness, functional tolerances, mould reliability, and inspection standards must remain protected.

Design Strategies for Controlling Mould Cost

  • Maintain consistent wall sections, use workable draft angles, and remove unnecessary details that increase machining or assembly time.
  • Choose single-cavity or multi-cavity tooling according to forecast volume, cycle requirements, and the acceptable initial investment.
  • Match materials such as S50C, P20, 1.2738, H13, or 718H to the required mould life, surface quality, and operating conditions.
  • Apply these principles to electronics housings, appliance components, automotive parts, industrial products, and consumer goods without altering essential functionality.

How Geometry and Tooling Architecture Affect Price

Part design is one of the first areas to review when controlling injection mould expenditure. Deep pockets, sharp transitions, complex ribs, and difficult undercuts can require additional machining, special tooling, inserts, or complicated mould assembly. Removing features that do not contribute to performance can reduce these costs while leaving the critical design intent unchanged.

Uniform wall thickness helps reduce filling variation, sink marks, warpage, and trial adjustments. Practical draft angles also make ejection more reliable and reduce the risk of surface damage. These improvements can shorten mould development time while supporting stable production quality.

Select the Right Cavity Configuration

Cavity count should be determined by the expected order volume rather than by a general preference for higher output. A single-cavity mould normally provides a simpler and more economical option for lower-volume projects or early production. For larger demand, a multi-cavity mould can improve output and reduce the unit tooling contribution, although it requires more precise balancing, machining, and validation.

Custom precision plastic injection mould design

Longterm's custom precision plastic injection mould service supports both single-cavity and multi-cavity solutions, with mould life options ranging from 50,000 to 1,000,000 shots. The final configuration can therefore be aligned with the customer's forecast, part complexity, and required production schedule.

Match Steel and Finishing to Actual Requirements

Mould steel should be selected according to wear, corrosion, polishing, production volume, and expected service conditions. S50C, P20, 1.2738, H13, and 718H each offer different levels of performance and cost. Selecting a grade that fits the application avoids unnecessary material expenditure while maintaining the required durability and part quality.

The same principle applies to cosmetic finishing. SPI or VDI specifications should be included when appearance or texture is important, but a premium finish should not be applied where the product has no visual or functional need for it. Surface finish, steel grade, and polishing requirements should be considered together during the design review.

Assess Hot Runners as a Production Decision

A hot runner may reduce material waste and support efficient high-volume production, but it also introduces additional design, maintenance, and service considerations. Its suitability depends on production quantity, resin behavior, gate location, cycle targets, and the required maintenance plan. It should be adopted only after the complete mould and manufacturing conditions have been evaluated.

Cost Control Must Include Verification

Lower tooling cost is useful only when the mould continues to produce conforming parts. Longterm's process includes IQC incoming inspection, mould trial testing, dimensional inspection, and full inspection before shipment. These checkpoints help confirm mould performance, part dimensions, surface quality, and compliance with the approved specifications.

Longterm Manufacturing Solutions Limited is certified to ISO 9001:2015 for the design, manufacture, and sales of precision moulds and the sales of plastic products. Its recorded projects include an electronic housing mould for an Italian manufacturer, a double-shot overmoulding tool for a French product brand, a home appliance component mould for a US brand distributor, and an industrial equipment housing mould for an Australian manufacturer. Reported results included accurate dimensions, smooth surfaces, reliable alignment, stable trial samples, specification compliance, and effective resolution of technical issues.

Plastic injection mould manufacturing example

Comparison of Key Design Choices

Design choicePotential cost impactQuality condition to protect
Single-cavity mouldReduces initial tooling complexity and investmentAppropriate when the required output does not justify multiple cavities
Multi-cavity mouldRequires more tooling work but can support higher production capacityMaintain cavity consistency, balanced filling, and uniform part dimensions
Simplified geometryLimits complex machining, inserts, assembly, and modification workRetain functional details, adequate draft, uniform walls, and specified tolerances
Application-specific steelControls material cost according to service and production requirementsSelect S50C, P20, 1.2738, H13, or 718H according to mould life and performance needs
Hot runner optionCan improve material and production efficiency when properly justifiedReview gating, maintenance, resin behavior, and trial requirements in advance

Frequently Asked Questions

Can a less complicated mould still produce high-quality parts?

Yes. Removing nonfunctional details, reducing difficult undercuts, and using suitable draft angles can lower tooling effort without affecting essential dimensions, strength, or performance.

Is a multi-cavity mould always the best way to reduce unit cost?

No. Multi-cavity tooling is valuable when volume is high enough to justify the added investment and technical complexity. For limited demand, a single-cavity design may provide better overall project economics.

How can mould cost be managed for parts with cosmetic surfaces?

Define the required SPI or VDI finish according to the product's appearance and use conditions. Avoid specifying a higher finish level unless it provides a clear visual or functional benefit, and review the finish together with the selected steel.

Conclusion

The most reliable way to reduce injection mould cost is to remove unnecessary complexity while preserving every feature that supports part function and inspection. Review the geometry, select cavity count according to demand, choose steel for the required service life, specify only necessary surface treatment, and treat hot runners as an application-specific option. Longterm provides OEM custom plastic injection moulds, mould making with injection moulding, precision double-shot and overmoulding tools, mould development, and mass production support. For technical consultation, contact rogerluo@longterm-mold.com.

About Longterm

Longterm Manufacturing Solutions Limited, operating under the Longterm brand, was established in 2010 and supplies customers in North America, Europe, Australia, and other international markets. Its team of 50 employees supports mould design, precision machining, tooling, mould manufacturing, and plastic parts production.

The company develops and manufactures injection moulds, rapid prototypes, precision components, and automated production solutions. It holds ISO 9001:2015 certification and has experience serving customers across several industrial sectors.

Longterm Manufacturing Solutions Limited logo

REPORT

Code
Choose a different language
Current language: