All Categories

How to Prepare Your Warehouse Before LCD Separators and BA-937C Soldering Stations Arrive

VIP-User
2026-11-22

Before receiving LCD Separators or related electronic repair equipment, prepare a warehouse that is clean, dry, well organized, and easy to navigate. The receiving area should provide enough room for unloading cartons, checking quantities, and inspecting products. Electrical outlets used for testing should be protected, while the BA-937C soldering stations should remain in their original packaging until inspection is complete.

Warehouse Preparation Priorities

  • Keep electronic maintenance equipment in a dry, clean location protected from moisture, dust, impact, and other contaminants.
  • Reserve shelving and floor positions that can safely accommodate products measuring 225 x 194 x 105 mm.
  • Create a designated inspection station with safe electrical access for testing the 120 W BA-937C soldering stations.
  • Organize stock according to its intended use, including mobile phone and tablet repair, laptop and computer board repair, and electronics training.

Recommended Receiving and Storage Layout

A well-planned warehouse should distinguish between newly received cartons, products awaiting inspection, and approved inventory. This arrangement supports a controlled workflow: unload the shipment, examine the external packaging, confirm the quantity, test the equipment, and then transfer accepted units to storage or dispatch.

Each BA-937C unit has dimensions of 225 x 194 x 105 mm and a net weight of 1 kg. Shelves, bins, or protected floor locations should provide sufficient support without placing excessive weight on the cartons. Leave practical clearance around each package so employees can lift, inspect, and move the units without causing compression or impact damage.

BAKU BA-937C rapid temperature soldering station for electronic repair

Inspection Area Requirements

The inspection zone should have a clean, stable workbench, adequate lighting, order and product records, and a protected power connection. Keeping this area separate from accepted inventory makes it easier to identify products that still require testing. The BA-937C operates at 120 W, has a noise level below 45 dB, and supports an iron temperature range of 200 to 500 degrees Celsius. These specifications are mainly used during functional verification and equipment operation rather than for long-term storage.

Remove unnecessary packing materials and dust from the inspection area. After the units pass inspection, keep their original packaging for internal transfers, storage, or future delivery. Clear labels can classify stock by application, helping warehouse teams select the correct equipment for repair shops, training centers, or distribution orders.

Inventory Planning for Different Applications

The BA-937C is designed for a range of electronics service environments. It can support mobile phone and tablet repair, laptop and computer circuit board maintenance, and classroom or laboratory training. Separating inventory by application can improve picking accuracy and simplify replenishment planning.

BAKU supplies standard products from stock for wholesale customers and also offers OEM and ODM customization. The company reports standard production workshops, several assembly lines, and flexible manufacturing arrangements for large orders, small trial quantities, and customized projects. Its product range includes soldering stations, solder flux, solder paste, screwdrivers, and ultrasonic cleaners.

Listed certifications for its soldering stations include CE certification for the European Union, FCC certification for the United States, and RoHS certification. Reported supply applications include mixed repair-tool orders for a mobile phone shop in the Philippines, vocational training equipment in Malaysia, distribution projects in Saudi Arabia, and laptop repair workshop equipment in Mexico.

Warehouse Requirements at a Glance

Preparation Area Suggested Arrangement
Storage conditions Use a dry, clean, orderly location protected from moisture, dust, and physical impact.
Carton placement Provide shelving or protected floor positions for 225 x 194 x 105 mm products weighing 1 kg each.
Receiving workflow Keep incoming cartons, products under inspection, and accepted stock in clearly separated areas.
Functional testing Prepare a clean workbench and safe electrical access for checking the 120 W soldering stations.
Inventory labeling Identify stock by repair, education, wholesale distribution, or other customer requirements.

Frequently Asked Questions

Should the BA-937C remain in its original packaging before testing?

Yes. Original packaging helps protect the soldering station during receiving and internal handling. Check the carton condition first, then inspect and test the unit before moving approved products into the main storage area.

What amount of warehouse space is needed for one unit?

The BA-937C measures 225 x 194 x 105 mm and weighs 1 kg. In addition to the product footprint, allow handling space around the carton so employees can remove, inspect, and return the unit without striking nearby packages.

What should be available at the receiving and inspection point?

Provide a clean work surface, protected power access, suitable lighting, product identification records, and a holding location for cartons that have not yet been approved. The inspection should confirm the received quantity, product model, packaging condition, and basic operating performance.

Final Recommendations

Before LCD Separators or electronic repair tools arrive, establish a dry receiving zone, protected storage, a clear inspection workflow, and dedicated locations for accepted and untested stock. For the BA-937C, plan around its 225 x 194 x 105 mm dimensions, 1 kg net weight, 120 W power rating, and 200 to 500 degree Celsius iron temperature range. BAKU states that it provides wholesale products from stock, supports OEM and ODM projects, offers a typical delivery period of 7 to 15 days, and conducts full-function testing before shipment. CE, FCC, and RoHS certifications are listed for its soldering stations. For technical advice or customized solutions, contact hanker002@bakutool.com.

About BAKU

Guangdong BAKU Technology Development Co., Ltd. was established in 2003 and focuses on professional tools for electronic device repair, covering more than thirty product categories. Its independent R&D laboratory includes structural, hardware, and testing engineers and supports ID design, structural development, PCB debugging, and reliability testing. The company owns 25 design patents, serves customers in South America, Europe, Southeast Asia, and other regions, and reports an export ratio of 90%. Its listed solder station certifications include CE and FCC.

Guangdong BAKU Technology Development Co., Ltd. logo

REPORT

Code
Choose a different language
Current language: